Go Back   BuildingHomes.ca - Building your community! > General > Building and Construction

Building and Construction General topics of building a home and the home construction industry.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 2009-03-29, 09:38 PM
Eunectesboy Eunectesboy is offline
Senior Member
Regular User
 
Join Date: Dec 2007
Location: Ontario/Burlington
Posts: 307
Default WTF??? Do you really build 'sound' homes this way

We managed to walk around our 'new Sundial house' the other day in preparation of moving in this summer and couldn't help but notice that in at least 12+ places they used 2x4 studs for framing that had almost been 90% cut through prior to use/placement in the framing.

Now just to give you some idea of what I am talking about...we walked around the place and noticed quite quickly on the second floor that at least 12+ studs that were used had been almost 90% cut through and then (regardless of the fact they had been circular sawed almost completely in two) used anyway. And to make matters worse (better?) they decided (in their infinite wisdom) to use 2x2 studs to "support" the faulty 2x4 studs by 'bracing' the crappy 2x4's with 2x2's screwed into the sides.

Now here is my question...

If you cut a 2x4 stud/beam almost 90% of the way through (thus, arguably, compromising the structural integrity of the stud) and are sitting there contemplating what to do to correct the situation..do you (as an ethical/honest/skilled business person)...

A) replace the stud entirely with a new beam/stud of wood...because after all this is $450K+ house and it pretty much calls for it...or

B) do you decide to leave the almost fully shorn/cut studs intact with only some 2x2 beams that you uncerimoniously screwed in to try and support the structural poor studs used?

OK

OK

You be the judge.

Look at the pic's attached...and decide if they should have left these studs in at all. They were somehow cut and almost 90% split and the rocket scientists at Sundial decided to use them anyway so long as they supported them with 2x2 'splints'.

Not to mention that the wood seems to be crap anyway...and the bottom of some beams are already split in addition to the 'newly splinted' studs.

I mean...really...

WTF...

For a $450+K home...how's 'bout you use a new piece of wood????
Attached Thumbnails
Click image for larger version

Name:	100_1894.JPG
Views:	412
Size:	380.1 KB
ID:	3956   Click image for larger version

Name:	100_1896.JPG
Views:	386
Size:	335.0 KB
ID:	3955  
Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sound systems Vivi Home Owner Tips, Upgrades and Maintenance 11 2009-12-21 11:56 AM
Sound Proofing M&H Ottawa 1 2008-05-25 06:36 AM
Wiring For Sound Trepex Ottawa 25 2008-05-16 06:30 PM
Sound Proofing concerns Gary and Paula Milton - Hollybank 1 2007-03-18 04:44 PM
Custom build vs builder plan build - opinions needed pls TKRHHome Home Owner Tips, Upgrades and Maintenance 0 2004-05-27 03:02 PM



All times are GMT -4. The time now is 09:53 AM.



Copyright © PHAND Corporation
This document may not be used elsewhere without the expressed written consent of PHAND Corporation.
*** There is no association between this website and any builder. ***

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2019, vBulletin Solutions, Inc.