Go Back   BuildingHomes.ca - Building your community! > General > Building and Construction

Building and Construction General topics of building a home and the home construction industry.


Reply
 
Thread Tools Display Modes
  #1  
Old 2018-04-05, 11:32 AM
BancroftBoy BancroftBoy is offline
Member
Regular User
 
Join Date: Jan 2011
Location: Ottawa, ON
Posts: 90
Default Drywalling 9' ceiling

When it comes to 9' ceilings, what is the best practice for installing drywall on the walls? Some contractors say to use 9' sheets applied vertically while others prefer to lay horizontally. I guess as long as the mud/taper is top notch, you'd never know the difference. Especially in a horizontal install there would be a 1' joint in the middle.

Thoughts?
Reply With Quote
  #2  
Old 2018-04-05, 11:53 AM
BartBandy BartBandy is offline
Senior Member
Regular User
 
Join Date: May 2010
Location: Ontario/Nobleton
Posts: 1,642
Default

There are arguments for both. If I'm installing it myself (and I swore to myself I'd never do that again) I go vertical. Most pros prefer horizontal. I just don't like head joints. Easier to hide those at the top of the wall, to me. When I have head joints in the ceiling, I make a butt board by stapling a couple strips of paper tape to 48"x6" scrap plywood to suck up the head joints and provide a space for the taped joint. But I'm weird like that.

I also like starting outside corners of walls with the long factory edge because it hides the corner bead better. But again, I'm weird like that.

But if they are doing a 9' wall horizontally, there is 54" wide drywall. That's preferable to a strip in the middle. 10' high wall, and it's two horizontal joints and I don't know why they wouldn't go vertical, but it's not my profession.
__________________
Reply With Quote
  #3  
Old 2018-04-05, 11:59 AM
BancroftBoy BancroftBoy is offline
Member
Regular User
 
Join Date: Jan 2011
Location: Ottawa, ON
Posts: 90
Default

I guess I'll just let them deal with it. In the end, I probably won't be able to tell the difference (I hope..).

I had no idea you could get 54" wide drywall. That's good to know.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Concrete ceiling: Replace chandelier with ceiling fan? ottawa Home Owner Tips, Upgrades and Maintenance 4 2014-04-11 08:36 AM
Contractors for removal of stucco ceiling and to put smooth ceiling FraserALotG61 Burlington 1 2012-01-11 09:43 PM
Basement drywalling around Heating vent katezia Ottawa 20 2011-01-22 12:49 PM
Basement Drywalling - Permit Required? giugno21 Basement Finishing and Renovations 4 2010-06-14 09:48 PM
Difference between Smooth ceiling and Sriple ceiling a16s Markham / Thornhill / Vaughan 12 2008-10-20 02:06 PM



All times are GMT -4. The time now is 11:00 AM.



Copyright © PHAND Corporation
This document may not be used elsewhere without the expressed written consent of PHAND Corporation.
*** There is no association between this website and any builder. ***

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.